Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Hose/Line HVAC: Service and Repair
A/C Hose Assembly
Removal Procedure
1. Cap all openings to prevent contamination.
2. Disconnect the negative battery cable.
3. Discharge and recover the refrigerant.
4. Remove the retaining nut and disconnect the A/C hose assembly connector block at the top rear of the compressor. Discard the sealing washers.
5. Separate the A/C hose from the discharge hose connector block.
6. Remove the hose support clamp bolt and the clamp along the left side of the engine compartment fender well.
7. Remove the nuts and disconnect the A/C hose at the fire wall evaporator flange connector block. Discard the O-ring.
8. Remove the A/C hose.
9. Cap the opening to the evaporator flange to prevent contamination.
10. Remove the nut that secure the discharge hose to the condenser pipe connector block.
11. Remove the discharge hose.
Installation Procedure
