daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Fuel Pump Relay|Testing and Inspection|Page 1875 > < Fuel Pressure|Specifications
Page 1
background image

Fuel Pump Relay: Testing and Inspection

Fuel Pump Relay Circuit Check

Circuit Description

When the ignition switch is turned ON, the powertrain control module (PCM)/Engine control module (ECM) will activate the fuel pump relay and run
the in-tank fuel pump. The fuel pump will operate as long as the engine is cranking or running and the PCM/ECM is receiving ignition reference pulses.
If there are no reference pulses, the PCM/ECM will shut off the fuel pump within 2 seconds after the ignition switch is turned ON.

Diagnostic Aids

An intermittent problem may be caused by a poor connection, rubbed through wire insulation, or a broken wire inside the insulation.

Fuel Pump Relay|Testing and Inspection|Page 1875 > < Fuel Pressure|Specifications