Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
5. Install the fuel rail assembly into the cylinder head.
6. Install the fuel rail mounting bolts.
Tighten
Tighten the fuel rail mounting bolts to 25 Nm (18 lb.ft).
7. Connect the fuel inlet hose.
8. Connect the fuel injector harness connectors. Rotate each fuel injector as required to avoid stretching the wire harness.
9. Install the fuel pressure regulator. Refer to "Fuel Pressure Regulator (DOHC)".
10. Connect the negative battery cable.
11. Perform a leak check of the fuel rail and fuel injectors.
