Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Electronic Brake Control Module: Service and Repair
ELECTRONIC BRAKE CONTROL MODULE (EBCM)
The Electronic Brake Control Module (EBCM) is located behind the kick panel, on the right side of the car.
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the right-side kick panel.
3. Pull back the retaining clamps and remove the Electronic Brake Control Module (EBCM) from its holding fixture.
4. Disconnect the EBCM electrical connectors and remove the EBCM from the vehicle.
Installation Procedure
1. Connect the Electronic Brake Control Module (EBCM) to the vehicle by connecting the electrical connectors.
2. Install the EBCM to the vehicle. Secure the EBCM under the clamps.
3. Install the right-side kick panel.
4. Connect the negative battery cable.
