daewoo Workshop Repair Guides

Daewoo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Compressor Clutch Relay: Service and Repair

Compressor Cut-Off Relay

Removal Procedure

1. Disconnect the negative battery cable.
2. The relay is located in the fuse junction box in the engine compartment on the left-hand side.
3. Pull the relay straight up and out.

Installation Procedure

1. Align the relay terminal contacts with the base receptacle.
2. Push the relay into the base until it is seated.
3. Connect the negative battery cable.

Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >