daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Clockspring Assembly / Spiral Cable, Air Bag > < Sensing and Diagnostic Module (SDM) <--> [Air Bag Control Module]|Locations|Page 3848
Page 2
background image

3. Install the air duct between the instrument panel and the floor.
4. Install the front console.
5. Install the rear console.
6. Connect the negative battery cable.
7. Check for proper operation of the system.

-

Turn the ignition ON while watching the supplemental inflatable restraints warning lamp.

-

The warning lamp should turn ON for approximately 4 seconds, and then turn OFF.

Clockspring Assembly / Spiral Cable, Air Bag > < Sensing and Diagnostic Module (SDM) <--> [Air Bag Control Module]|Locations|Page 3848