Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
2. Feed the free end of the seat belt from the luggage compartment through the deck lid sill plate.
3. Feed the free end of the seat belt through the C-pillar trim panel.
4. Install the seat belt anchor to the floor with the bolt.
Tighten the seat belt anchor bolt to 35 Nm (26 lb.ft).
5. Install the seat belt anchor to the C-pillar with the bolt.
Tighten the seat belt anchor bolt to 35 Nm (26 lb.ft).
6. Install the C-pillar trim panel. Refer to Interior Trim.
7. Install the rear seat cushion and rear seatback. Refer to Seats.
6. Install the luggage compartment wheelhouse trim panel. Refer to Interior Trim.
