Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
1. Install the front wheel speed sensor to the steering knuckle. Secure it with the bolt.
Tighten
Tighten the front wheel speed sensor bolt to 7.8 Nm (69 inch lbs.).
2. Connect the front wheel speed sensor electrical connector.
3. Lower the vehicle.
4. Connect the negative battery cable.
Speed Sensor Jumper Harmess
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the Electronic Brake Control Module (EBCM) from its retaining clamp.
