daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

ABOUT US
Vehicle Speed Sensor (VSS) <--> [Vehicle Speed Sensor] > < Throttle Position Sensor|Diagrams|Page 387

Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)

Page 1
background image

Throttle Position Sensor: Service and Repair

Removal Procedure

1. Disconnect the negative battery cable.
2. Disconnect the throttle position (TP) sensor connector.
3. Remove the TP sensor retaining boils and the TP sensor.

Installation Procedure

1. With the throttle valve closed, position the TP sensor on the throttle shaft. Align the TP sensor with the bolt holes.
2. Install the TP sensor retaining bolts.

Tighten
Tighten the throttle position sensor retaining bolts to 2 Nm (18 lb.in).

3. Connect the TP sensor connector.
4. Connect the negative battery cable.

Vehicle Speed Sensor (VSS) <--> [Vehicle Speed Sensor] > < Throttle Position Sensor|Diagrams|Page 387