Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Front Steering Knuckle: Service and Repair
Removal and Installation
KNUCKLE/STRUT ASSEMBLY
-
Tools Required
-
KM-507-B Ball Joint Remover
Removal Procedure
1. Loosen the nuts that attach the top of the strut assembly to the vehicle.
2. Uncrimp the caulking nut sleeve and remove the caulking nut and the washer.
3. Raise and suitably support the vehicle.
4. Place the jackstands under the frame of the vehicle.
5. Lower the vehicle slightly so the weight of the vehicle rests on the jackstands and not on the control arms.
6. Remove the wheel.
