daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

DOHC Pump Drive Pulley|Page 3408 > < DOHC Pump Drive Pulley|Page 3406
Page 2
background image

3. Loosen the power steering pump pulley bolts.
4. Remove the pump drive belt from the pulley by loosening the alternator adjusting bolt and pulling the alternator forward.
5. Raise and suitably support the vehicle.
6. Remove the right wheel. 
7. Remove the right engine under cover. 

8. Loosen the securing bolt on the tension pulley and release the tension on the A/C compressor belt by turning the tightening bolt.
9. Remove the A/C compressor belt.

10. Remove the crankshaft pulley and the bolt.

11. Remove the timing belt cover lower bolts and the clip.

DOHC Pump Drive Pulley|Page 3408 > < DOHC Pump Drive Pulley|Page 3406