Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
5. Tighten all the steering gear retaining bracket nuts and bolts.
Tighten
Tighten the steering gear retaining bracket nuts and bolts to 38 Nm (28 ft. lbs.).
6. Check that the steering gear has remained in the straight-ahead position.
7. Connect negative battery cable.
8. Reconnect the coolant surge tank with the attaching nuts.
Tighten
Tighten the coolant surge tank attaching nuts to 4 Nm (36 inch lbs.).
Disassembly and Reassembly-Power
RACK AND PINION
There is no provision for overhaul or disassembly of the rack and pinion power steering gear. The power steering gear is serviced only as an assembly.
Disassembly and Reassembly-Manual
RACK AND PINION
-
Tools Required
-
KM-J-22610 Installer
-
KM-472 Wrench
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.
2. Cut off the rack and pinion boot clamps and remove the rack and pinion boot.
