Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
7. Remove the pinion shaft seal by pressing down on one side of the seal and pulling up on the other side of the seal.
8. Remove the retaining ring and pull the pinion and valve assembly out of the rack and pinion housing.
9. Remove the housing end cover.
10. Remove the rack housing retaining ring.
11. Remove the rack shaft from the rack and pinion housing.
Assembly Procedure
Important: All interlocking metal parts must be lubricated with lithium-base grease as they are assembled.
1. Install the rack shaft into the rack and pinion housing. Install the retaining ring.
2. Install the housing end cover.
