Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Front Steering Knuckle: Service and Repair
Disassembly and Reassembly
Disassembly Procedure
1. Raise and suitably support the vehicle.
2. Remove the knuckle/strut assembly from the vehicle.
3. Remove the wheel hub and the wheel bearing.
4. Remove the spring and the strut cartridge.
Assembly Procedure
1. Install the strut cartridge and the spring.
2. Install the wheel bearing and hub.
3. Install the knuckle/strut assembly.
4. Lower the vehicle.