Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Wheels: Service and Repair
Wheel Balancing
ON-VEHICLE BALANCING
On-vehicle balancing will help correct vibrations due to brake drum, rotor, and wheel cover imbalances.
NOTICE: Do not allow the front suspension to hang free. When the drive axle is run at an extreme angle, extra vibrations can occur, as well as
damage to seals and joints.
1. During on-vehicle balancing, do not remove the balance weights from the off-vehicle dynamic balance.
2. If more than 1 ounce of additional weight is required, split the weight between the inner and the outer rim flanges.
WARNING: Do not spin the drive wheels faster than 55 km/h (35 mph) as indicated by the speedometer. This limit is necessary because the
speedometer indicates only one-half of the actual wheel speed when one drive wheel is spinning and the other drive wheel is stopped.
Personal injury and damage may result from high-speed spinning.
3. Spin the driven tire and the wheel assemblies using the engine.
