Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
7. Remove the bolts from the frame and remove the transaxle mount.
Installation Procedure
1. Install the transaxle mount and the transaxle mount bolts.
Tighten
Tighten the transaxle mount bolts to 75 Nm (55 ft. lbs.).
2. Raise the engine.
3. Install the bolts to the frame.
Tighten
Tighten the frame bolts to 75 Nm (55 ft. lbs.).
4. Install the left side splash shield.
