Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Clutch Pedal Assembly: Adjustments
Clutch Release Point Adjustment (Hydraulic)
CLUTCH RELEASE POINT ADJUSTMENT (HYDRAULIC)
Adjustment Procedure
1. Apply the parking brake.
2. Run the engine at idle speed.
3. While moving the shift lever into the reverse position, depress the clutch pedal slowly and measure the distance between the point when gear noise
is not heard and the point the clutch pedal is completely depressed. The distance should be more than 30 mm (1.2 inches).
4. If the distance is not more than 30 mm (1.2 inches), check the following:
-
Clutch pedal height
-
Clutch pedal play
-
Air in the system
-
Clutch cover and disk