Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
7. Remove the tripot from the axle shaft.
8. Remove the tripot joint seal from the axle shaft.
Installation Procedure
Tools Required
J-35566 Seal Clamp Pliers
1. Install a new small seal retaining clamp onto the seal. Do not crimp the seal retaining clamp.
2. Install the seal onto the axle shaft.
3. Install the tripot onto the axle shaft.
4. Install the shaft retaining ring onto the axle shaft using the snap ring pliers J-8059.
5. Fill the tripot housing with 140 to 160 g (4.9 to 5.6 ounces) of the recommended grease. Repack the tripot with 140 to 160 g (4.9 to 5.6 ounces)
of the recommended grease.
