Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
6. Reposition the tape over the weatherstrip, the windshield, and the windshield frame to hold the windshield in place.
7. Let the adhesive dry for 24 hours.
8. Remove the tape.
9. Check for waterleaks by pouring water on the windshield. If a leak is found, dry the windshield and fill the area that leaks with adhesive. If the leak
persists, remove the windshield and repeat the entire procedure.
10. Install the inside rearview mirror.
11. Install the cowl vent grille.
