Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
2. Apply tape to the new weatherstrip and the rear window to hold the weatherstrip in place.
3. Apply adhesive primer to the rear window frame and the perimeter of the rear window.
4. Apply glass adhesive to the rear window frame.
5. Install the rear window into the rear window frame.
6. Reposition the tape over the weatherstrip, the rear window, and the rear window frame to hold the rear window in place.
7. Let the adhesive dry for 24 hours.
8. Remove the tape.
9. Check for waterleaks by pouring water on the rear window. If a leak is found, dry the window and fill the area that leaks with adhesive. If the leak
persists, remove the rear window and repeat the entire procedure.
10. Connect the rear window defogger electrical connectors (left side electrical connector shown, right side electrical connector similar).
11. Connect the negative battery cable.
