Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the reservoir with the nuts and the bolts.
Tighten
Tighten the washer fluid reservoir nuts to 20 Nm (15 lb.ft).
Tighten the washer fluid reservoir bolts to 20 Nm (15 lb.ft).
2. Connect the reservoir pump electrical connector(s).
3. Connect the washer hose(s) to the reservoir.