Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Wiper Arm: Service and Repair
Windshield Wiper Arm
(Typical)
Removal Procedure
1. Open the hood.
2. Remove the nut from the wiper arm.
3. Pull the wiper arm off.
Installation Procedure
1. Install the wiper arm.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Secure the wiper arm with the nut.
Tighten
Tighten the wiper arm nut to 11 Nm (97 lb.in).
3. Close the hood.