Lanos S Hatchback L4-1.6L DOHC D-TEC MFI (1999)
8. Remove the bolts and the wiper motor.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the wiper motor with the bolts.
Tighten
Tighten the wiper motor bolts to 9 Nm (80 lb.in).
2. Connect the electrical connectors.
3. Install the engine coolant reservoir with the nuts.
Tighten
Tighten the engine coolant reservoir nuts to 4 Nm (35 lb.in).