daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Wiper Switch > < Windshield Wiper Motor|Page 4783
Page 1
background image

Wiper Motor: Service and Repair
Rear Window Wiper Motor

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the rear window wiper arm.  
3. Remove the hatchback door lower garnish molding. 
4. Remove the bolts and the rear wiper motor.
5. Disconnect the electrical connector.

Installation Procedure

1. Connect the electrical connector.

NOTE:  Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.

2. Install the rear wiper motor with the bolts.

Tighten
Tighten the wiper motor bolts to 9 Nm (80 lb.in).

3. Install the hatchback door lower garnish molding. 
4. Install the rear window wiper arm. 
5. Connect the negative battery cable.

Wiper Switch > < Windshield Wiper Motor|Page 4783