Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Brake Caliper: Service and Repair
Disassembly and Reassembly
Disassembly Procedure
1. Remove the caliper assembly.
2. Remove the caliper guide pin that connects the caliper piston housing to the retaining frame.
3. Remove the front pad brake set, including the pad springs, from the caliper.
Caution: Do not attempt to catch the piston when removing the piston with compressed air. The piston will pop out of its bore with enough force
to damage a hand or finger.
Important: Insert a piece of hardwood into the caliper housing interior when removing the piston.
4. Using compressed air, blow out the piston from the housing.
5. Remove the outer seal.
6. Remove the inner seal from the caliper piston bore.