Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Brake Rotor/Disc: Service and Repair
Front Rotor
Removal Procedure
Notice: Do not hang the caliper assembly from the brake hose. Any resulting internal hose restriction will impede uniform braking action.
Important: To guarantee uniform braking on both sides, both rotors must have identical surfaces regarding smoothness and scoring depth. For this
reason, always replace both rotors.
1. Remove the caliper assembly without disconnecting the brake hoses.
2. Remove the caliper bracket.
3. Remove the rotor-to-front wheel hub detent screw from the rotor and the front wheel hub.
4. Pull off the rotor.
Installation Procedure
1. Inspect the rotor.
2. Install the rotor to the front wheel hub by tightening the detent screw.
-
Tighten the rotor-to-front wheel hub detent screw to 4 Nm (35 inch lbs.).
3. Install the caliper bracket.
-
Tighten the caliper bracket mounting bolts to 95 Nm (70 ft. lbs.).
4. Install the caliper assembly.