Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Wheel Cylinder: Service and Repair
Removal and Installation
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the rear wheels.
3. Mark the position of the wheels relative to the wheel hubs.
4. Remove the brake drum.
5. Remove the shoe and lining.
6. Clean dirt and foreign material from around the wheel cylinder brake line inlet, the pilot, and the bolt.
7. Disconnect the brake line from the wheel cylinder.
8. Plug the opening in the brake line to prevent fluid loss or contamination.
