Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Parking Brake Cable: Service and Repair
Removal Procedure
1. To remove the parking brake console hood, the front muffler, and the heat shield.
2. Remove the rear wheels.
3. For the ABS braking system (shown), unfasten the detent screw to remove the rear brake drums. For the non-ABS system, remove the split pin and
the castle nut to remove the brake drum.
4. Remove the retaining ring for the parking brake cable on each side of the vehicle.
5. Remove the plastic sleeve.
6. Remove the brake cable from the parking brake shoe lever and from the brake backing plate.
7. Remove the nut that fastens the brake cable to a holding bracket on the rear axle. Remove the cable from the bracket on each side of the vehicle.
