Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
13. While holding the exhaust camshaft firmly in place, install the exhaust camshaft gear bolt.
-
Tighten the exhaust camshaft gear bolt to 67.5 Nm (49 ft. lbs.).
14. Install the valve cover and the valve cover gasket.
15. Install the valve cover washers.
16. Install the valve cover nuts.
-
Tighten the valve cover nuts to 9 Nm (80 inch lbs.).
17. Connect the ignition wires to the spark plugs.
18. Connect the CMP sensor.
19. Install the spark plug cover.
20. Install the spark plug cover bolts.
-
Tighten the spark plug cover bolts to 3 Nm (27 inch lbs.).
21. Install the oil filler cap.
22. Connect the vacuum line.
