Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
21. Measure the width of the flattened plastic thread of the plastic gauging using a ruler.
22. Inspect the bearing clearance for permissible tolerance ranges.
23. Install the connecting rod bearing caps to the connecting rods.
24. Tighten the connecting rod bearing caps using new bolts.
-
Tighten the connecting rod bearing cap bolts to 25 Nm (18 ft. lbs.) using a torque wrench. Use the angular torque gauge KM-470-B to tighten
the connecting rod cap bolts to 30 degrees plus 15 degrees.
25. Install the oil pump.
26. Install the oil pump retaining bolts.
-
Tighten the oil pump retaining bolts to 10 Nm (89 inch lbs.).
27. Install the oil pump pickup tube.
