Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Valve Cover: Service and Repair
VALVE COVER
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the oil filler cap.
3. Remove the spark plug cover bolts and cover.
4. Disconnect the breather tube from the valve cover.
5. Disconnect the crankcase ventilation tube from the valve cover.
6. Disconnect the camshaft position (CMP) sensor connector.
7. Disconnect the vacuum line.
8. Disconnect the ignition wires from the spark plugs.
9. Remove the valve cover nuts.
10. Remove the valve cover washers.
11. Remove the valve cover.
12. Remove the valve cover gasket from the valve cover.
