Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
13. Install the upper and lower front timing belt cover.
14. Install the upper and lower front timing belt cover bolts.
-
Tighten the upper and lower front timing belt cover bolts to 10 Nm (89 inch lbs.).
15. Install the crankshaft pulley.
16. Install the crankshaft pulley bolt.
-
Tighten the crankshaft pulley bolt to 95 Nm (70 ft. lbs.) using a torque wrench. Using the angular torque gauge KM470-B, tighten the
crankshaft pulley bolt 30 degrees plus 15 degrees.
17. Install the power steering pump pulley, if equipped.
18. Install the power steering pump pulley bolts, if equipped.
-
Tighten the power steering pump pulley bolts to 25 Nm (18 ft. lbs.).
19. Install the alternator drive belt.