Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
10. Install a new O-ring onto the A/C compressor discharge hose connector block filling.
11. Install the A/C compressor discharge hose to the condenser pipe connector block and install the retaining nut.
Tighten
Tighten the discharge hose-to-condenser pipe connector pipe retaining nut to 16 N.m (12 lb-ft).
12. Install the radiator. Refer to Engine Cooling.
13. Connect the negative battery cable.
14. Evacuate and recharge the A/C system. Refer to "Discharging, Adding Oil, Evacuating, and Charging Procedures for A/C System".