Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
1. Connect the electrical connectors to the proper sockets on the back of the controller.
2. Install the mechanical cable housings to the proper control positions.
3. Install the eyelets on the end of each cable, pressing each onto the proper post.
4. Install the controller by gently inserting the controller into the proper position on the center console.
5. Install the lower left and the lower right controller retaining screws.
Tighten
Tighten the HVAC controller retaining screws to 4 N.m (35 lb-in).
6. Install the audio system. Refer to Audio Systems.
7. Connect the negative battery cable.
8. Confirm the proper operation of the controller by moving it through all of the controller's possible functioning positions.
