Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Evaporator Core: Service and Repair
EVAPORATOR CORE
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the instrument panel carrier assembly. Refer to Instrumentation/Driver Information.
NOTE: Handle the case carefully to avoid damage to the door actuating linkage.
3. Remove the heater/air distribution case assembly. Refer to "Heater/Air Distribution Case".
4. Remove the screws that secure the evaporator case cover.
5. Remove the cover.
6. Slide the evaporator flange support plate upward to facilitate evaporator removal.
7. Remove the evaporator from the case.
INSTALLATION PROCEDURE
