daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Housing Assembly HVAC|Service and Repair|Page 2865 > < Housing Assembly HVAC|Service and Repair
Page 2
background image

11. From the engine side of the fire wall, remove the bolts that secure the heater/air distribution case assembly to the fire wall.
12. Remove the heater/air distribution case assembly from the vehicle.

INSTALLATION PROCEDURE

1. Clean the O-ring surface areas of dirt and contamination.

2. Install two new O-rings onto the A/C suction hose and the liquid evaporator pipe at the fire wall in the engine compartment.
3. Install the heater/air distribution case assembly and tighten the bolts.

Tighten
Tighten the heater/air distribution case assembly retaining bolts (fire wall side) to 8 N.m (71 lb-in).

Housing Assembly HVAC|Service and Repair|Page 2865 > < Housing Assembly HVAC|Service and Repair