Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
3. Install the receiver-dryer into the clamp position.
4. Install the connector block retaining nut and bolt to the receiver-dryer.
Tighten
Tighten the liquid condenser pipe connector block-to-receiver-dryer bolt to 14 N.m (10 lb-ft).
5. Install and tighten the band clamp bolt.
6. Connect the negative battery cable.
7. Evacuate and recharge the A/C system. Refer to "Discharging, Adding Oil, Evacuating, and Charging Procedures for A/C System".