Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Tail Lamp: Service and Repair
TAILLAMPS
REMOVAL PROCEDURE
1. Remove the luggage compartment rear quarter trim panel.
2. Disconnect the electrical connectors.
3. Remove the nuts and the lamp assembly.
4. Remove the bulb(s).
INSTALLATION PROCEDURE
1. Install the bulb(s).
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the lamp assembly with the nuts.
Tighten
Tighten the taillamp assembly nuts to 2.5 N.m (22 lb-in).
3. Connect the electrical connectors.
4. Install the luggage compartment rear quarter trim panel.
