daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 3641 > < Diagram Information and Instructions|Page 3639
Page 1
background image

Trunk Lamp: Testing and Inspection

Luggage Compartment Lamp Inoperative - Step 1 - 13

CAUTION:  Always make sure there Is an electrical load (lamp bulb, etc.) in any circuit between battery terminals. Do not make a short circuit between
battery terminals with a jumper wire. Hazardous sparking would result and could cause injury

Test Description

The number(s) below refer to step(s) on the diagnostic table.

1. Bulb test. Clip one end of a jumper wire to the negative battery terminal. Clip the other end of the jumper wire onto one end of the bulb. Take the

free end of the bulb (the end without the jumper attached) and touch it to the positive battery terminal.

Diagram Information and Instructions|Page 3641 > < Diagram Information and Instructions|Page 3639