Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor (DOHC)
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Disconnect the sensor electrical connector.
3. Remove the power steering pump pulley. Refer, Power Steering Pump.
4. Remove the timing belt upper cover. Refer to, DOHC Engine Mechanical.
5. Remove the camshaft position (CMP) sensor bolts.
6. Remove the CMP sensor from the top.
Installation Procedure
