Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Audible Warning Device Control Module: Service and Repair
CHIME MODULE
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the screws and the chime module.
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
2. Install the chime module with the screws.
Tighten
Tighten the chime module screws to 3.5 N.m (31 lb-in).
3. Connect the negative battery cable.