Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Steering Gear: Service and Repair
Power Steering Gear
Removal and Installation
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the inner tie rods from the rack and pinion assembly by removing the lock plate, the inner tie rod bolts, and the inner tie rod plate. Do
not reuse the lock plate.
3. Position the steering gear straight ahead by turning the steering wheel until the spokes are centered diagonally and pointing downward.
4. Loosen the top pinch bolt on the coupling flange.