Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
Control Arm Bushing: Service and Repair
Front
CONTROL ARM BUSHINGS
-
Tools Required
-
KM-508-A Remover/Installer
-
KM-158 Remover/Installer
-
KM-307-B Removal Plate
Disassembly Procedure
1. Remove the control arm.
2. Press off the rear bushing using a press, the remover/installer KM-158, and the removal plate KM-307-B.
3. Press out the front bushing using the remover/installer KM-508-A, and the remover/installer KM-158.
Assembly Procedure
1. Coat the control arm rear shaft with a multipurpose lubricant.