Lanos S Sedan L4-1.6L DOHC D-TEC MFI (2001)
7. Remove the bolts from the frame and remove the transaxle mount.
Installation Procedure
1. Install the transaxle mount and the transaxle mount bolts.
-
Tighten the transaxle mount bolts to 75 Nm (55 ft. lbs.).
2. Raise the engine.
3. Install the bolts to the frame.
-
Tighten the frame bolts to 75 Nm (55 ft. lbs.).
4. Install the left side splash shield.
5. Install the left front wheel.
6. Lower the vehicle.