Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
55. Install the upper and lower front timing belt cover bolts.
Tighten the upper and lower front timing belt cover bolts to 10 Nm (89 inch lbs.).
56. Install the power steering pump, if equipped.
57. Install the power steering pump mounting bolts.
Tighten the power steering pump mounting bolts to 25 Nm (18 ft. lbs.).
58. Install the engine lifting device.
59. Remove the engine from the engine overhaul stand KM-412.
60. Install a new crankshaft rear oil seal using installer J-36972 or KM-635.
61. Install the flywheel or flexible plate.