Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Oil Pump: Service and Repair
OIL PUMP
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the power steering pump, if equipped. Refer to Steering; Power Steering Pump.
3. Remove the timing belt.
4. Remove the rear timing belt cover.
5. Disconnect the oil pressure switch connector.
6. Remove the crankshaft position (CKP) sensor bolt.
7. Remove the CKP sensor.
8. Remove the oil pan.
9. Remove the oil pump pickup tube and the support bracket bolts.
10. Remove the oil pump pickup tube.