Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
Installation Procedure
1. Install the exhaust manifold gasket.
2. Install the exhaust manifold.
3. Install the exhaust manifold retaining nuts and tighten them in the sequence shown.
Tighten the exhaust manifold retaining nuts 25 Nm (118 ft. lbs.).
4. Install the auxiliary catalytic converter nuts to the exhaust manifold.
Tighten the auxiliary catalytic converter-to-exhaust manifold nuts to 40 Nm (30 ft. lbs.).
5. Install the exhaust manifold heat shield.
6. Install the exhaust manifold heat shield bolts.
Tighten the exhaust manifold heat shield bolts to 15 Nm (11 ft. lbs.).
7. Connect the pre-converter oxygen sensor connector.