Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
EGR Valve: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
3. Remove the bolts and the EGR valve.
Installation Procedure
1. Clean the cylinder head mating surface.
2. Install a new EGR valve gasket.
3. Install the EGR valve with the retaining bolts.
Tighten
Tighten the exhaust gas recirculation valve retaining bolts to 20 Nm (15 lb.ft).
4. Connect the EGR valve electrical connector.
5. Connect the negative battery cable.