Lanos SE Hatchback L4-1.6L DOHC D-TEC MFI (1999)
1. Line up the notches in the dash seal to the notches in the rack and pinion housing.
2. Connect the dash seal to the housing.
3. Connect the flange and steering coupling assembly.
4. Install the rack and pinion steering assembly into the vehicle.
Dash Seal-Manual
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.
2. Remove the flange and steering coupling assembly.
3. Remove the dash seal from the rack and pinion housing.
Assembly Procedure
1. Line up the notch in the dash seal and the rack and pinion housing.
2. Connect the dash seal to the housing.
3. Connect the flange and steering coupling assembly.
4. Install the rack and pinion steering assembly into the vehicle.
Hydraulic Cylinder Lines
Disassembly Procedure
1. Remove the rack and pinion steering assembly from the vehicle.
2. Disconnect the cylinder lines from the rack and pinion housing. Remove the O-ring seals.