daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Starting and Charging > < Wheel Speed Sensor|Front|Page 3227
Page 2
background image

6. Release both branches of the harness from the retainers and remove it from the vehicle.

Installation Procedure 

1. Connect the new wheel speed sensor harness to both wheel speed sensors.

2. Plug the harness connector into C902.
3. Secure the harness into its retainers.

4. Push the retainer clamp of C902 into its mounting hole.
5. Lower the vehicle.
6. Connect the negative battery cable.

Starting and Charging > < Wheel Speed Sensor|Front|Page 3227